Files
doc/ks2/nas-seed.md
T
Julien LutranandClaude Opus 5 66c7bca28f ks2: ks4 pull leg and its WireGuard tunnel move from nuc to nas
nuc-seed.md -> nas-seed.md. The leg was designed around nuc's USB pool,
which is exactly the device it must not depend on. Target pool ks4backup
now lives on tank; nas becomes WG peer 10.8.0.22 and nuc's tunnel retires
once seeded — nuc no longer needs one at all, since transmission-bt (the
only other user) moved to nas with its own in-container tunnel.

ks4 needs no change: traffic arrives masqueraded as the wireguard
container whichever peer sent it.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-30 23:53:30 +02:00

97 lines
3.5 KiB
Markdown

# ks4 pull leg — seed after FTTH
Status: **prepared, waiting on the FTTH link.**
⚠️ **Changed 2026-08-30: this leg lands on `nas`, not on nuc.** It was
originally designed for nuc's USB pool `usb4t`, but that pool proved to
be the least reliable device in the setup
([nuc/usb4t-dropouts.md](../nuc/usb4t-dropouts.md)) — which is exactly
what an off-site copy of ks4 must not be. The 4 TB disk moved to direct
SATA on the new host `nas` (`192.168.0.4`,
[nas/nas-install.md](../nas/nas-install.md)), and the target pool
`ks4backup` moved with it.
Consequences versus the original plan:
- Target pool `ks4backup` is now backed by `tank/backup/ks4` on nas.
- The **WireGuard tunnel moves too**: nas becomes peer `10.8.0.22`;
nuc's `wg-ks4` (`10.8.0.20`) is retired once this works. nuc no longer
needs a tunnel at all — `transmission-bt`, its only other user, now
runs on nas and carries its own in-container tunnel (`10.8.0.21`,
unchanged, ks4 needs no edit for it).
- ks4's ufw rule is unchanged: traffic arrives masqueraded as the
`wireguard` container (`192.168.1.18`) whichever peer sent it.
## Prerequisites
- [ ] `tank` running on SATA for ≥ 7 days with zero pool suspensions —
the gate that replaces "fix the USB enclosure"
- [ ] FTTH up (the first pass moves ~1.75 TiB)
## Setup (root on nas)
```sh
# 1. peer nas on ks4's wireguard container
# (run on ks4) — <nas-pubkey> from /etc/wireguard/wg-ks4.key on nas
incus exec wireguard -- wg set wg0 peer <nas-pubkey> allowed-ips 10.8.0.22/32
incus exec wireguard -- wg-quick save wg0
# 2. tunnel on nas: /etc/wireguard/wg-ks4.conf, modelled on nuc's
# Address = 10.8.0.22/32, peer pubkey TVs6d7…,
# Endpoint = 193.70.35.17:51845,
# AllowedIPs = 10.8.0.0/24, 192.168.1.1/32, keepalive 25
systemctl enable --now wg-quick@wg-ks4
# 3. incus remote over the tunnel
incus remote add ks4 https://192.168.1.1:8443 --accept-certificate --token '…'
incus list ks4: | head # sanity: remote reachable
```
## Seed
```sh
# full pull of every ks4 instance into pool ks4backup (tmux — first pass
# moves ~1.75 TiB through the WG tunnel)
/root/scripts/incus-copy.sh -r ks4 -s ks4backup 2>&1 | tee -a /var/log/incus-copy-ks4.log
```
Notes:
- First pass is a full send per instance; later refreshes are
ZFS-incremental **as long as they run at least every
`snapshots.expiry` (7 d on ks4)** — same caveat as
[ks4's local leg](../ks4/local-backup-cron.md).
- Replicas arrive stopped with `boot.autostart=false` (the script does
this) — they must never come up on the LAN with ks4's proxy devices.
## Cron (after the seed)
Add to nas's root crontab, offset from the 03:30 nuc→nas push, the
04:00 nas→nuc push and ks4's own 01:00/05:00 jobs:
```cron
0 5 * * * /root/scripts/incus-copy.sh -r ks4 -s ks4backup >> /var/log/incus-copy-ks4.log 2>&1
```
## Verification (release gate for ks2)
```sh
incus list --project backup -c ns -f csv # all ks4 instances present
# test-restore one instance: copy a replica to the local pool,
# start it isolated, check the service answers, then delete it
incus copy solar solar-restoretest -s incus
incus start solar-restoretest && incus exec solar-restoretest -- systemctl is-system-running
incus delete -f solar-restoretest
```
Once verified, tick the nas gate in the [ks2 plan](plan.md) and retire
nuc's tunnel:
```sh
# on nuc
systemctl disable --now wg-quick@wg-ks4 && rm /etc/wireguard/wg-ks4.conf
# on ks4
incus exec wireguard -- wg set wg0 peer <nuc-pubkey> remove
incus exec wireguard -- wg-quick save wg0
```