Nightly replication had been failing since Aug 17 behind a misleading incus error; root cause is a JMicron USB bridge dropping off the bus (61 disconnects in 30 days) and suspending the pool — the disk itself is SMART-clean. Records the recovery (clear/scrub), the damage, the ordered fixes, and why nothing alerted: zed was running without an MTA on the host. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
3.4 KiB
usb4t: USB dropouts suspend the pool (2026-08)
Symptom seen first in the nightly backup log
(/var/log/incus-copy.log, job in /etc/cron.d/incus-copy): every
instance fails with
Error: Refresh instance: Create instance volume from copy failed:
Volume exists in database but not on storage
That message is misleading — incus is fine. The usb4t pool underneath
was SUSPENDED, so the replica volumes incus has in its database had
no storage behind them.
Diagnosis (2026-08-28)
The disk is healthy, the USB link is not:
smartctl -a -d sat /dev/sdc: PASSED, 0 reallocated, 0 pending, 0 offline-uncorrectable, 0 UDMA CRC errors, 463 power-on hours.dmesg:usb 4-3: USB disconnectfollowed by immediate re-enumeration — the enclosure drops off the bus and comes back as a new device. Bridge is JMicron 152d:0578 (the kernel already disables UAS for it and applies quirks).- 61 USB disconnects in 30 days; pool suspensions on Aug 17 (resilver), 19, 21, 27 (×2) and 28.
- While suspended, anything touching the pool hangs — the journal shows tasks blocked for 1000+ seconds.
Blast radius each time: nuc's own replicas (usb4t/backup/nuc) stop
being refreshed, /srv/media disappears from the Jellyfin containers,
and — once seeded — the ks4 pull leg (usb4t/backup/ks4) would stop
too. The pool holding the off-site copy of ks4 must not be the least
reliable device in the setup.
Recovery
zpool clear usb4t # device is back; ZFS resumes IO
zpool status -v usb4t # lists files damaged by the interrupted writes
zpool scrub usb4t # validate the whole pool
If clear hangs: zpool export usb4t && zpool import usb4t, reboot as
a last resort. Datasets remount by themselves once the pool resumes.
Damage from the 2026-08-28 incident: two pool-metadata objects
(<metadata>:<0x0>, <metadata>:<0x3d>) and one file —
/srv/media/videos/David Gilmour - Live In Gdansk (2008)/…D3.ISO
(re-rippable). Nothing in the backup datasets.
Fixes, in order
- Cable + port — short quality cable, straight into a rear USB-3 port, no hub (done 2026-08-28).
- Disable USB autosuspend so power management cannot drop the
device:
usbcore.autosuspend=-1on the kernel command line, or per-deviceecho on > /sys/bus/usb/devices/<dev>/power/control. - Replace the enclosure if dropouts continue — JMicron bridges are the usual suspect in this failure mode; an ASMedia-based enclosure is the durable fix. Deferred: watching for a few days first.
Alerting (why nobody noticed for 11 days)
zfs-zed was installed, enabled and running — but the host had no
MTA, so its notifications went nowhere. Fixed 2026-08-28:
apt install msmtp msmtp-mta bsd-mailx—sendmailis now msmtp,mail(bsd-mailx) is what ZED calls./etc/msmtprc(mode 600): SMTP relay account. ContainsCHANGEMEplaceholders — fill host/user/password/from. It also resolves/etc/aliases, whereroot:points at the real mailbox (placeholder too)./etc/zfs/zed.d/zed.rc:ZED_EMAIL_ADDR,ZED_EMAIL_PROG="mail",ZED_EMAIL_OPTS,ZED_NOTIFY_VERBOSE=1(so scrub results and resilvers are reported, not just failures),ZED_NOTIFY_INTERVAL_SECS=3600. Original kept aszed.rc.orig.
Test once the credentials are in:
echo "zed test $(date)" | mail -s "nuc alert test" root
tail -5 /var/log/msmtp.log